|
|
|
|
|
Product Enquiry
|
|
Further information about the VCEM5100 can be found using the options
below |
|
|
|
|
|
|
|
|
|
Continuous on-line analysis often only
considers the density of the emissions (e.g
mg/Nm3) In order to obtain a measurement
of total emissions for pollution
monitoring (e.g kg/hr) it is necessary
to either calculate or measure flow
within the gas stream.
The VCEM5100 provides non-contact
measurement of gas velocity using a
time-delay correlation of flue gas
infrared emissions received by two
detectors spaced a fixed distance apart.
Gas velocities ranging from 1m/sec to
50m/sec can be measured. The technique
is suitable for all combustion gases
including hot gases and gases with a
high dust burden. Designed as a
stand-alone instrument. |
|
|
|
| › |
Non-contact measurement |
|
› |
No moving components – maintenance free |
|
› |
Continuous real-time measurement |
|
› |
Auto low & high span check |
| › |
Suitable for hot & dirty gases upto
1000 deg C |
|
› |
Measurement in m/sec or m3/sec |
|
|
|
|
VCEM5100
Flue Gas Flow
Monitor |
|
|
 |
| |
|
|
