|
|
|
|
|
Product Enquiry
|
|
Further information about the GCEM4100 can be found using the options
below |
|
|
|
|
|
|
|
|
|
The GCEM4100 is a hot extractive analyser for difficult flue gas
monitoring applications. It uses
infrared absorption spectroscopy to
measure up to seven pollutant species in
a single self-contained unit. Many
conventional extractive systems require
the sampled gas to be cleaned and dried
to a very high standard prior to
analysis, invariably resulting in high
maintenance costs. Such elaborate
pre-conditioning is not required by the
GCEM4100. Process gases are
continuously drawn through a fine
filtered probe installed in the flue gas and transported to the measurement
chamber via a heated sample line -
without further conditioning. Designed
for use on gas turbines, the analyser is
MCERTS certified and satisfies QAL1
of the EU Standard
EN14181 for LCPD emission limit values
above 40ppm. |
|
|
|
| › |
Up to seven
gas species |
› |
Analogue and
serial digital output |
| › |
CO, CO2, NO,
NO2, SO2, HCL, CH4 & H2O |
› |
Automatic
calibration verification facility |
| › |
ppm, mg/m3
(measured) and mg/Nm3 (normalised) |
› |
Over five years
data logging via PC software package |
| › |
Real-time
normalisation for STP and H2O |
› |
Full zero
and span verification using audit gases |
| › |
Full range
of outputs and alarms |
› |
MCERTS certified
instrument -
Download Certificate |
|
|
|
|
GCEM4100 Flue Gas Analyser |
|
|
|
|
Left image
is the analyser cabinet and right
image is the air condition enclosure. |
|
|
