The GCEM4000 is a multi-channel flue gas analyser that uses Non-Dispersive Infrared Absorption (NDIR) technology. It provides high accuracy, low maintenance measurement of all the key combustion process emissions to atmosphere. It is capable of operating in very high dust loading conditions, up to several gm/m3 of dust.
Its performance can be verified automatically or manually on demand by the injection of zero and span protocol gases into the probe sample chamber.
- Up to seven gas species
- 0-400 deg C, higher temperatures available
- CO, CO2, NO, NO2, SO2, HCL, CH4, H2O
- Analogue and serial digital output
- ppm, mg/m3 (measured) and mg/Nm3 (normalised)
|Gas Species Options||Maximum 7 gases from: CO | NO | NO2 |NOx | N2O | SO2 | HCl | CH4 and CO2. Gas temperature pressure and H2O for data normalisation are standard.|
|Measuring units||ppm | mg/Nm³ | mg/m³ | %|
|Response Time||Less than 200 Seconds (T90)|
|Ambient Temperature||-20°C to +50°C|
|Power supply||48V DC from CEMS Control Panel|
|Construction||Corrosion resistant epoxy coated aluminium housing sealed to IP66|
|Analogue outputs||4-20mA current outputs for each gas channel supplied isolated. 500O load max fully configurable from software.|
|Logic Outputs||up to 8 x volt-free SPCO contacts 50V 1A max. Configurable as alarm contacts | 1 x volt-free SPCO contact 50V 1A max for data valid signal|