The all NEW TunnelTech 305 Air Flow Monitor

With over 30 years’ experience in the tunnelling market, CODEL are excited to have recently launched the 6th generation single point flow monitor utilising the very latest ultrasonic technology. CODEL’s tunnel monitoring products simplify the challenge of sourcing, installing and maintaining a highly accurate and reliable tunnel monitoring solution. The TunnelTech 305 offers low cost […]

Are You Using Bag Filters to Control Dust Emissions?

Power plants, cement plants, steel plants, smelters, asphalt plants, incinerators, food manufacturers, chemical producers, pharmaceutical producers, and other industrial companies are widely using bag filters to control Dust Emission. On some applications bag filters are also used to capture other product coming out of mills, for example, cement, coal, and other raw materials. Fabric filters, […]

Why Measure Flue Gas Velocity?

Many industrial processes release flue gases to the atmosphere. Under European Directives the majority of those are classed as emission sources and therefore require continuous emission monitoring. European standards for monitoring pollutants and flow for CEMS (Continuous Emission Monitoring Systems) are already in place and other countries usually follow them to some extent. The CODEL […]

EnergyTech Range

The EnergyTech range is a series of gas and particulate analysers focused on power generation process, safety and efficiency. The EnergyTech 101 is a low cost optical dust/smoke monitor, the 301 is a new tribo-electric dust monitor that can be used in indicative and calibrated modes. The EnergyTech 200 series is a new range of […]

What are the Challenges in Raw Gas Measurement?

Any measurement location is unique! Here at CODEL we treat each point as an individual location, as even to relocate just one meter downstream can change the process parameters sufficiently to require a different solution. In order to select a solution for a particular measuring point we need to know all the system parameters for […]

Which type of Dust Monitor do I need, Optical or Triboelectric?

Smoke and dust are both known as particulate matter (PM).  PM can be measured via a number of different techniques, including Opacity and Triboelectric effect. Opacity is a measure of light attenuated as it crosses the stack. A proportion of the light is lost through scattering, absorption and reflection by the PM in the stack. […]

CODEL Conference 2019 Survey Results

It’s now a couple of months since the CODEL 2019 Conference which we all felt went very well but we also wanted to know how our distributors felt so we sent out a follow-up questionnaire to all who attended. You can view the results here.  

Getting the Design Right for a Reliable CO Mill Fire Monitoring System

Potential coal fires and coal-induced explosions in a coal handling system pose serious safety concerns for any industry that is using pulverized coal. Spontaneous combustion of coal in a coal handling system (coal conveyors, coal mills, coal silos, coal bunkers) has long been recognized as a fire hazard. Coal fires usually start in hotspots when […]

The Requirement for SCR & SNCR

For decades coal has been the fuel of choice for most power stations around the world but also happens to be the most pollutant. The environmental regulation in Europe, China and India has stringent emission limits which coal fired power stations are finding it increasingly difficult and expensive to comply with and are therefore employing […]