Обзор
VCEM 5000/5100 представляет собой последнее поколение уникальных мониторов расхода компании CODEL. Эти системы измеряют скорость дымовых газов с помощью высокоточного измерения времени полета, которое производится на основе анализа перекрестной корреляции инфракрасных излучений турбулентного газа.
Для определения уровня загрязнения используются два надежных инфракрасных детектора, установленных на трубе или воздуховоде на расстоянии 1 м друг от друга в направлении расхода. Высокоэффективные воздушные завесы позволяют значительно увеличить время между техническим обслуживанием, периодами и чисткой окон (обычно 1 год).
Особенности и преимущества
- Бесконтактное инфракрасное зондирование.
- Бесконтактное инфракрасное зондирование. Непрерывное измерение.
- Подходит для горячих и грязных газов.
- Нет ограничений на верхнюю температуру газа.
- Отсутствие движущихся компонентов.
- Высокая эксплуатационная готовность, низкая потребность в обслуживании.
Сертифицированный продукт
VCEM 5100 имеет сертификаты TUV и MCERT, что подтверждает точность и надежность его измерительных возможностей.
Типичные области применения мониторинга расхода
Крупные заводы по сжиганию
Малые заводы по сжиганию
Цементные заводы
Пылесборники
Процесс ДДГ
Процесс SCR и SNCR
Энергия из отходов
Инсинераторы
Возобновляемые источники энергия
Выработка электроэнергии:
Фармацевтика
Нефтехимия
Спецификация продукта
| Принцип работы | Инфракрасная корреляция |
| Единицы измерения | m/s, m3/s |
| Температура окружающей среды | от -20°C до +50°C |
| Источник питания | 48 В постоянного тока от блока сигнального процессора (SPU) |
| Материалы | Алюминий с эпоксидным покрытием по классу IP67 |
| Аналоговые выходы | 2 x 4-20 мА токовых выхода в стандартной комплектации, изолированные, максимальная нагрузка 500 Ом, полностью настраиваемые с клавиатуры |
| Логические выходы | 2 x безвольтовые контакты SPCO, 50 В, 1 А макс, конфигурируемые как контакты тревоги 1 x безвольтовый контакт SPCO, 50 В, 1 А макс, для сигнала подтверждения данных |
| Данные о серии | Протокол RS485 MODBUS (опция) |
Полную техническую спецификацию можно найти в техническом паспорте / брошюре продукта.
The VCEM5100 is a continuous flue gas velocity monitor designed to measure the velocity and volumetric flow of gases in stacks and ducts. It can be used as a standalone flow monitor or as part of a complete Continuous Emissions Monitoring System (CEMS), supporting applications including combustion plants, cement plants, waste-to-energy, incineration, power generation and FGD processes.
The VCEM5100 uses infrared cross-correlation technology to determine the time of flight of naturally occurring infrared radiation within the turbulent flue gas. Two infrared detectors are positioned on the stack or duct, typically around 1 metre apart, allowing the system to calculate gas velocity without making physical contact with the gas stream.
Because the VCEM5100 sensors do not need to be inserted into the gas stream, there are no moving components exposed to the flue gas. This makes the technology particularly suitable for applications where high temperatures, dust loading or corrosive gases could make conventional flow measurement technologies difficult to maintain.
Yes. The VCEM5100 is designed for demanding high-temperature applications and CODEL states that it can operate with flue gas temperatures exceeding 1,000°C. This makes it suitable for applications where conventional flow measurement technologies may struggle with long-term operation.
Yes. The infrared correlation technique is designed to provide non-contact measurement even in challenging gas conditions. CODEL specifically highlights applications involving high dust loading and corrosive gases, including raw gas, SCR inlet/outlet and FGD inlet measurement.
The VCEM5100 is designed for low-maintenance operation. It has no moving components and uses high-efficiency air curtains to help keep the optical surfaces clean. CODEL states that this can typically extend the period between maintenance and window cleaning to around one year, depending on the application.
The VCEM5100 provides continuous measurement of gas velocity in m/s and volumetric flow in m³/s. It provides two configurable 4–20 mA analogue outputs as standard, with optional RS485 Modbus communications.
Yes. The VCEM5100 can operate as a standalone flow monitor or form part of an integrated CEMS. Its configurable analogue outputs, alarm/status contacts and optional RS485 Modbus communications allow the flow measurement to be integrated with wider emissions monitoring and data acquisition systems.
Yes. CODEL states that the VCEM5100 has received TÜV QAL1 certification, and the product page also identifies the VCEM5100 as both TÜV and MCERT certified.
Typical applications include:
- Large and small combustion plants
- Waste-to-energy plants
- Инсинераторы
- Cement plants
- Power generation
- Renewable energy
- FGD processes
- SCR and SNCR systems
- Dust collectors
It can also be used for process measurement in more demanding locations, such as raw gas and high-temperature process streams.
Yes. The non-contact measurement principle makes the VCEM5100 suitable for challenging process locations, including SCR inlet/outlet and FGD inlet applications. CODEL also identifies DeNOx and FGD monitoring among its flow-monitoring applications.
Yes, the VCEM5100 can form part of a US EPA-compliant emissions monitoring system where continuous flow measurement is required. US EPA Performance Specification 6 (PS-6) covers flow-rate measurement for continuous emission rate monitoring systems. CODEL states that the VCEM5100 can satisfy the requirements of 40 CFR Part 60, Appendix B, PS-6. The exact compliance requirements depend on the applicable EPA regulation, permit and application, so CODEL should confirm the appropriate configuration for each US project.
The key difference is the non-contact infrared measurement principle. Conventional technologies can require components to be exposed to the flue gas, whereas the VCEM5100 measures gas velocity remotely using infrared correlation. This means no moving parts are exposed to the gas stream and makes the system particularly attractive for high-temperature, high-dust or otherwise challenging applications.
Yes. The most appropriate flow-monitoring technology depends on factors such as stack or duct geometry, gas temperature, gas composition, dust loading, expected velocity range and the applicable regulatory requirements. CODEL can assess the application and recommend an appropriate configuration.
Запрос информации о продукте
Скачать технический паспорт / брошюру
Ищете руководство?
Пожалуйста, свяжитесь с нами, и мы будем рады помочь вам.
Для получения дополнительной информации о любом из наших продуктов, пожалуйста, заполните форму запроса, и сотрудник ответит вам в кратчайшие сроки.
Вы также можете позвонить по телефону: +44(0)1629 814351