Home / Products / Process Control / Gas Monitors /
Overview
The GCEM 40 High Dust Analyser is the latest evolution in CODEL’s line of in-situ gas analysers, purpose-built for the challenges of high-particulate environments. Developed using decades of expertise and hands-on industry experience, the GCEM 40 offers exceptional reliability, accuracy and stability, even in the most demanding high dust applications.
Ideal for continuous emissions monitoring in combustion and process conditions, the GCEM 40 uses advanced infra-red spectroscopy to measure key gases including CO, NO, NOx, SO₂, CH₄, CO₂ and H₂O. The technology eliminates cross-sensitivity from other gas stream contaminants, providing highly precise measurements that support both regulatory compliance and process optimisation.
Features & Benefits
- Single or Multi-species infrared absorption analyser
- In-situ stainless steel probe measurement.
- Engineered probe guard with high-resistance coating.
- Measures CO, NO, NO₂, NOx, SO₂, CH₄, CO₂ & H₂O
- Handles dust loads up to 10 g/m³
- No sampling systems, dryers or coolers required
- Built-in probe shield for harsh gas conditions
- Certified to EN15267
Certified Product
The GCEM40 Series has both TUV and MCERT certification which signifies the accuracy and reliability of its measuring capabilities.
Typical Gas Monitoring Applications
Large Combustion Plants
Small Combustion Plants
Cement Plants
Glass Manufacturing
FGD Process
SCR and SNCR Process
Energy From Waste
Incinerators
Renewable Energy
Power Generation
Pharmaceutical
Petrochemical
Steel Plant
Crematoria
Metals Processes
Chemical Plant
Product Specification
| Certified Ranges | 0-500ppm, 0-1000ppm for CO,NO & SO2 to EN15267 |
| Measuring units | ppm | mg/Nm³ | mg/m³ | % |
| Response Time | <200secs |
| Ambient Temperature | -20 to +50°C Certified -20 to +55°C On request |
| Power Requirements | 24V DC @ 15A |
| Construction | probe – 316L stainless steel Head & DDU – Powder coated aluminium (IP66) |
| Analogue outputs | 5 x 4 to 20mA isolated, 500Ω load, fully configurable from keypad. |
| Logic Outputs | 5 x volt-free SPCO contacts, 50V, 1A max, configurable as alarms 1 x volt-free SPCO contact, 50V, 1A max, for data valid |
| Serial Data | RS485 modbus configured |
You can find the full specification in the product data sheet / brochure.
Product Enquiry
Data Sheet / Brochure Download
Looking for a manual?
Please contact us below and we will be happy to help you.
For further information on any of our products, please complete our enquiry form and a member of staff will respond as soon as possible.
You can also call: +44(0)1629 814351
